Use adhesive tape for water pipes, just like the scotch tape we usually use. Use hose PTFE tape only when there is water. Everyone can use PTFE tape, but many people don't know about PTFE tape for water hoses. Next, let's introduce the Anbang PTFE tape.  

A leaky pipe isn't just an emergency! How to use water pipe PTFE tape correctly?  

1. When gluing, do not immerse the workpiece in the bottle, cut off the upper part of the plastic bottle, and squeeze the glue. Go straight to the thread.  

2. Apply 2-3 pitches in the middle of the thread and should close the direction of the circle.  

3. Tighten with a normal wrench, no need for a tube wrench.  

4. During construction and installation, the connecting parts need to maintain a clean surface. If there are impurities such as oil, paint, varnish, etc., on the surface of the connection, it needs to be cleaned with cotton yarn, gasoline, acetone, etc., and it can only work after the solvent has evaporated and dried. Better.  

5. It can be tested and used within about 1-12 hours at room temperature.